Connectors

  • 34 and 4 pin connector

    34 and 4 pin connector

     A connector is a proxy or a wrapper around an API that allows the underlying service to talk to Microsoft Power Automate, Microsoft Power Apps, and Azure Logic Apps. It provides a way for users to connect their accounts and leverage a set of pre-built actions and triggers to build their apps and workflows.

     

     The plastic part precision is very high, and the matching position needs to be made within a tolerance of 0.01-0.02mm. Its material is LCP fireproof V0 material.

     

    ✭ This product needs to be produced by a high-speed injection molding machine, with a short injection cycle and high product accuracy. The injection cycle should be controlled within 15-25 seconds to ensure that each size of the product is consistent.

     

    ✭ The requirements for the mold are also very high, and the position of the product connection port needs to be made of separate mold inserts, and the tolerance of each insert must be guaranteed within the tolerance range of 0.005mm.

     

    ✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.

  • Small precision servo steering gear cover

    Small precision servo steering gear cover

    With the continuous expansion of the robot market, many robot manufacturing companies have launched very fierce competition. The service life of the robot, reducing noise has become a major technical problem. This part of the small precision servo servo plays a very important role, because each joint of the robot needs a servo to achieve different actions.

     

    Our plastic part is the housing part of the servo steering gear, and the plastic material used is high-performance PA66+30GF material. Under the action of the gears of the servo steering gear, it can ensure that the plastic shell will not deform and remain stable during the movement of the gears. This plastic shell has very high requirements for the accuracy of the mold, especially the dimensional tolerance of the gear positioning hole, to ensure that it is within the tolerance range of 0.005mm. Our mold materials are manufactured using imported materials from Becu and S136.

     

    This plastic shell is composed of three plastic shells, an upper shell, a middle shell and a lower shell. They must be perfectly matched to ensure that the center position of the gear positioning hole is consistent. Therefore, for this kind of precision plastic parts, the mould cavity is only 2, so that the size can be better controlled.

     

    If you have similar products, Please do not hesitate to contact us. We will be your best partner.